how to cut out a nori bunny

nov2009/feb2010

[photos are from the document "(how to cut out a) nori bunny kit" - feb2010 (see bonus material below)]

1.) get some nori (example here uses nori from the breakfast room at the Hotel Asia Center - Tokyo, Japan - Nov2009)

2.) get a nori cutter (bunny style) (example here uses a nori cutter from the 100 Yen store in Uchinada, Japan - Nov2009)

nori cutter detail

3.) open nori package

4.) insert nori into cutter

5.) apply pressure

6.) enjoy

related stuff: ray johnson (how to draw a bunny), how to cut out a cheddar bunny (a drawing), how to cut out a cheddar crayon (a video), and a whole thread on fluxlist

bonus material

how to open a nori bunny kit

1.) open lid. (note: it looks like there is another lid - do not be alarmed, this is an internal cover piece)

2.) pull up on cover piece tab. (note: there is padding attached to the underside of the cover piece)

3.) pull up on fitted cover piece tabs, (note: nori bunny documents are resting on top of the fitted cover piece [see instructions above])

4.) exposing cutter resting at the bottom of the kit. (note: the nori [not shown in this photo] usually rests right under that (4))

5.) and there you are... (and there's the nori!)

(still) related stuff: ray johnson (how to draw a bunny), how to cut out a cheddar bunny (a drawing), how to cut out a cheddar crayon (a video)

back to objects

© jamie newton